Eyewater are custom award-winning frames handmade in Seattle, USA. The founder of Eyewater worked as an engineer for Specialized, Cannondale and Parlee. Marvel at the attention to detail in their lugged carbon frames. This piece is a size XS.
Eyewater Molive Blue Rim Brake Frameset
$6,800.00
Product Details
Press Fit 86 bottom bracket
1 1/8 straight steerer
Enve 2.0 full carbon fork
27.2mm seat tube ID
Chris King NoThreadSet
Rim brake w/ quick release
One piece carbon ‘wishbone’ seat stays and chain stays
Full carbon dropouts w/ replaceable alloy hanger
External mechanical cable routing | Internal electronic routing
Precise Miters
Eyewater Bicycles uses highly controlled miters cut for a tight fitment and load transfer that is at the heart of tube-to-tube frame construction.
Precise Miters
All carbon, no filler
Eyewater Bicycles are built without any filler material. This means the material is consistent throughout the frame. There are no dead zones caused by epoxy-based fillers nor any voids caused from poor laminate compaction.
All carbon no filler
Surface finish
Straight from the curing oven, Eyewater Bicycles have a pristine surface finish. Resulting in virtually no post-cure sanding. You’ll find no burn-through or wrinkles on these frames.
Surface finish
Defined layup
Eyewater Bicycle joints are created with tested, defined, and documented layups. Ride your Eyewater Bicycle with confidence. These frames are not one-off prototypes, but verified and repeated products.
Defined layup
Measurements
Top Tube x Seat Tube
535x480mm
Materials
Raw Carbon
